|
|
Digitized embroidery designs and patterns for machine embroidery in PES HUS ART
PCS SEW and JEF
formats with free test designs to download (freebies)
|
|
|
Annual sale now on !
All designs are less 30% until 25 December 2009
|
|
Frilly Ethnic Designs ...4x4
|
The Frilly Ethnic Patterns 4x4 embroidery design collection consist of 7 large fringework designs
and 7 smaller regular designs.
The 7 larger designs is digitized so you can apply "fringe work" techniques.
The bobbin thread on some of the satin stitch elements cut and the top stitches is pulled through to
create a frilly effect.
The Frilly Ethnic Patterns is digitized for the 4x4 inch (100mm x 100mm)
hoop size. Available formats are PES HUS ART PCS VIP DST XXX SEW and JEF.
|
|
7 Smaller regular designs (4x4 hoop)
|
|
|
|
4x4: W65.8mm x H 64.6mm
4 stops, 4 colors, 6825 stitches
|
|
4x4: W56.2mm x H 55.6mm
4 stops, 4 colors, 5708 stitches
|
|
4x4: W68.1mm x H 68.3mm
6 stops, 4 colors, 9750 stitches
|
|
|
|
|
4x4: W 67.0mm x H 67.6mm
7 stops, 5 colors, 12002 stitches
|
|
4x4: W 63.7mm x H 64.4mm
4 stops, 4 colors, 7881 stitches
|
|
4x4: W65.9mm x H 66.1mm
6 stops, 4 colors, 7390 stitches
|
|
|
4x4: W 468.5mm x H 68.4mm
5 stops, 5 colors, 4785 stitches
|
|
|
7 Larger fringework designs (4x4 hoop)
|
|
|
|
|
|
|
4x4: W 86.7mm x H 86.3mm
5 stops, 5 colors, 9397 stitches
|
|
4x4: W 74.1mm x H 73.2mm
7 stops, 4 colors, 9860 stitches
|
|
4x4: W 84.3mm x H 83.7mm
6 stops, 4 colors, 11668 stitches
|
|
|
|
|
|
|
|
4x4: W 83.0mm x H 83.8mm
7 stops, 5 colors, 13645 stitches
|
|
4x4: W 93.9mm x H 94.4mm
4 stops, 4 colors, 15642 stitches
|
|
4x4: W 81.4mm x H 81.8mm
7 stops, 4 colors, 11070 stitches
|
|
|
|
4x4: W 82.7mm x H 83.0mm
5 stops, 5 colors, 8475 stitches
|
|
Instructions
NOTE: The tention on your machine should be correctly set to succesfully
sew this fringework designs.
When sewing column or satin stitches the backside of your embroidery
must show approximately one third top thread, one third bobbin thread and one third top thread again.
|
Step 1: Sew the design. Use a medium to heavy cut away stabilizer. This will help the "anchor" stitches
to hold the frills once the bobbin thread has been cut.
Step 2: Turn the finished design over
and carefully snip the bobbin thread on the satin stitches. Use a small scissor with sharp points or
a seam ripper.
|
|
Step 3: Turn your design right side up again. Insert the tip of your tweazer or other blunt tool under
the satin stitches. Carefully pull the satin stitches to the top of the design.
|
Buy the Frilly Ethnic Patterns embroidery design collection for $20 US
Get your
collections now by following the link to our secure order forms at BMT Micro or send us a check. See
check order page for details.
|
Phone orders - Call BMT Micro
Tel 910 7929100
U.S.A. / Canada only
|
|
COPYRIGHT INFORMATION
All of the designs on designsbypetro.com are copyrighted. You may use these
designs for your personal embroidered items, embroidered items to sell, and embroidered items to give
as gifts. The rights to the designs themselves remain with designsbypetro.com. You may not transfer,
share, or sell the actual design files without written permission from designsbypetro.com.
|
|
