Lavender flowers embroidery design collection for machine embroidery

The Lavender embroidery design collection consists of 13 designs available for the 4x4 (100mm x 100mm) or 5x7 (130mm x 180mm) hoop.

NOTE: There is also 2 FREE STANDING lavender designs included. "Free standing" means that the design can be stitched on water soluable stabilizer called "Avlon +" (made by Vilene). The stabilizer is then rinsed away and you will be left with a stitched lavender flower and stem.
Full instructions are included.

The Lavender embroidery design collection is available in PES HUS ART PCS VIP XXX DST SEW and JEF formats.

4x4: W 95.7mm x H 92.7mm
3 stops 2 colors 11296 stitches
5x7: W 124.3mm x H 120.8mm
3 stops 2 colors 14886 stitches

4x4: W 62.2 mm x H 93.4mm
4 stops 3 colors 8130 stitches
5x7: W 80.8mm x H 121.4mm
4 stops 3 colors 10755 stitches

4x4: W 86.8mm x H 96.8mm
7 stops 4 colors 15643 stitches
5x7: W 112.8mm x H 126.1mm
7 stops 4 colors 21158 stitches

4x4: W 77.8mm x H 90.8mm
3 stops 2 colors 6122 stitches
5x7: W 101.1mm x H 118.2mm
3 stops 2 colors 8043 stitches

4x4: W 92.6mm x H 20.8mm
3 stops 2 colors 5627 stitches
5x7: W 120.4mm x H 26.9mm
3 stops 2 colors 7327 stitches

4x4: W 77.8mm x H 90.8mm
3 stops 2 colors 6122 stitches
5x7: W 101.1mm x H 118.2mm
3 stops 2 colors 8043 stitches

4x4: W 55.3mm x H 91.8mm
3 stops 2 colors 3687 stitches
5x7: W 71.9mm x H 119.5mm
3 stops 2 colors 4783 stitches

4x4: W 90.3mm x H 91.0mm
7 stops 4 colors 18503 stitches
5x7: W 117.3mm x H 118.9mm
7 stops 4 colors 24943 stitches

4x4: W 55.3mm x H 91.8mm
3 stops 2 colors 3687 stitches
5x7: W 71.9mm x H 119.5mm
3 stops 2 colors 4783 stitches

4x4: W 39.4mm x H 91.7mm
3 stops 2 colors 2274 stitches
5x7: W 51.0mm x H 119.5mm
3 stops 2 colors 2996 stitches

4x4: W 42.7mm x H 89.6mm
3 stops 2 colors 6272 stitches
5x7: W 55.4mm x H 116.5mm
3 stops 2 colors 8146 stitches

4x4: W 39.4mm x H 91.7mm
3 stops 2 colors 2274 stitches
5x7: W 51.0mm x H 119.5mm
3 stops 2 colors 2996 stitches

4x4: W 26.1mm x H 91.7mm
3 stops 2 colors 2251 stitches
5x7: W 33.9mm x H 119.2mm
3 stops 2 colors 2977 stitches

4x4: W 12.5mm x H 89.6mm
3 stops 2 colors 2208 stitches
5x7: W 16.1mm x H 116.4mm
3 stops 2 colors 2867 stitches

4x4: W 26.1mm x H 91.7mm
3 stops 2 colors 2251 stitches
5x7: W 33.9mm x H 119.2mm
3 stops 2 colors 2977 stitches

This instructions are to be used for stitching the 2 free standing embroidery design files:

You will need:
1. Two layers of water suluble vilene Avlon plus. This is the white Avlon product that looks like tear away stabilizer but it will dissolve in water.
2. Embroidery thread.
3. Bobbins that has been wound with the same embroidery thread as what you intend using for your top thread.
4. Bowl of warm water.

Steps:
1. Stitch design on two layers of water soluble vilene.
2. Cut most of the vilene away leaving about 2-3mm aroung the edges of your flower.
3. Now roughly cut two pieces of vilene the same shape as your flower. Place one piece on top of design and one piece underneath the design and hold it in place with your fingers as you dip the design in the bowl of warm water . (This step is neccessary to make your flower more rigid to help it to stay upright when placed in a container).
4. Dissolve in warm water for just a few seconds until vilene is dissolved.
5. Lay design down on a flat surface to dry completely before ironing. A towel works well.
6. Set your iron on medium heat and lightly press down on the dried out flower design. This will cause the remaining Avlon plus to crystalise keep your design stiff.
It is important to dip your design for just a few seconds during step 4 so that some of the Avlon plus remains.

COPYRIGHT INFORMATION
All of the designs on designsbypetro.com are copyrighted. You may use these designs for your personal embroidered items, embroidered items to sell, and embroidered items to give as gifts. The rights to the designs themselves remain with designsbypetro.com. You may not transfer, share, or sell the actual design files without written permission from designsbypetro.com.